GP shift adjustment hint - Page 3

marko138 · 05-12-2008, 10:39 AM

GP shift is completely unneccessary on a Vtwin. I only need 1 gear...

pickle.of.doom · 05-12-2008, 01:11 PM

Until you are dragging your toe and shift knob while trying to upshift through a corner, there is no need.

DLIT · 05-12-2008, 01:16 PM

Can't knock it til you try it.

Mr Lefty · 05-12-2008, 04:26 PM

Quote:

Originally Posted by pickle.of.doom

Until you are dragging your toe and shift knob while trying to upshift through a corner, there is no need.

True... but if it makes you more comfortable to switch... why not?

I'll try it... when I get a chance... but I know I don't NEED it... I ride just fine the normal way...

NONE_too_SOFT · 05-12-2008, 04:30 PM

Quote:

Originally Posted by DLIT

Can't knock it til you try it.

i cant try it , after careful consideration i decided it would take extensive modding and aftermarket rear sets to get the desired effect on my ride.

No Worries · 05-13-2008, 12:07 AM

On the roads I ride on, I can stall an upshift. And my bikes redline well below 10K. But I can't stall a downshift. It has to be immediate. All the blind corners require slow in and fast out. A tap on the gearshift puts me in a lower gear and into the meat of the powerband.

Cutty72 · 05-13-2008, 12:08 AM

Quote:

Originally Posted by marko138

GP shift is completely unneccessary on a Vtwin. I only need 1 gear...

I need a couple, but i like to go fast, and I'm seriously lacking curves.
I'm thinking at the track it's gonna be 2-3... maybe 4 on the straights.

marko138 · 05-13-2008, 08:43 AM

Quote:

Originally Posted by Cutty72

I need a couple, but i like to go fast, and I'm seriously lacking curves.
I'm thinking at the track it's gonna be 2-3... maybe 4 on the straights.

Thats how it was for me at Pocono. You could get around the track in 3rd gear. I hit 4th on the back straight.

azoomm · 05-13-2008, 09:25 AM

Couple things...

The Norton is 1up 3down - RIGHT SIDE shift. It's complicated and difficult, and at least it isn't suicide shift.

On both the 748 and 998 the shift lever is REALLY far down below the rearset, but I haven't ever noticed an issue. In fact, my foot is almost straight up and down to slip it under there. But then, the rearsets are in a high position. Maybe that's it...

smileyman · 05-13-2008, 03:04 PM

The original reason for GP shift is that the old narrow power band bikes sometimes needed an upshift while leaned over. Impossible to do while leaned over on the left side since you could not get your foot under the nearly dragging, no ground clearance bikes of old...It became all the rage since you could continue your drive out of the corner without altering your line.

These days lean angles have grown so great with tire technology that it is really a no brainer, but since engines rev out so much longer you really can carry one gear thru most corners kinda eliminating the need.

I use GP shift although I can go back and forth relatively easily. The reason I like it is that it seems easier for me to bang away clutchless upshifts while pushing down on the lever. Also allows me to click up and out of a too quickly climbing wheelie...

05-12-2008, 01:11 PM	#22
pickle.of.doom el diablo de verde Join Date: Feb 2008 Location: Howell, MI Moto: VTR, CBR, DRZSM Posts: 1,046	Until you are dragging your toe and shift knob while trying to upshift through a corner, there is no need. __________________ WOS Forums

05-12-2008, 01:16 PM	#23
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	Can't knock it til you try it. __________________ Dress for the crash. Not the ride.

05-13-2008, 09:25 AM	#29
azoomm moderator chick Join Date: Feb 2008 Location: Hill Country TX Moto: Pasta Rockets Posts: 8,917	Couple things... The Norton is 1up 3down - RIGHT SIDE shift. It's complicated and difficult, and at least it isn't suicide shift. On both the 748 and 998 the shift lever is REALLY far down below the rearset, but I haven't ever noticed an issue. In fact, my foot is almost straight up and down to slip it under there. But then, the rearsets are in a high position. Maybe that's it... __________________ We have enough youth. How about a fountain of "smart"? Come Play at the Track!! http://www.elitetrackdays.com

05-13-2008, 03:04 PM	#30
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	The original reason for GP shift is that the old narrow power band bikes sometimes needed an upshift while leaned over. Impossible to do while leaned over on the left side since you could not get your foot under the nearly dragging, no ground clearance bikes of old...It became all the rage since you could continue your drive out of the corner without altering your line. These days lean angles have grown so great with tire technology that it is really a no brainer, but since engines rev out so much longer you really can carry one gear thru most corners kinda eliminating the need. I use GP shift although I can go back and forth relatively easily. The reason I like it is that it seems easier for me to bang away clutchless upshifts while pushing down on the lever. Also allows me to click up and out of a too quickly climbing wheelie... __________________ Arkriders.com To be the best you must first be willing to risk the worst!

05-13-2008, 12:07 AM	#26
No Worries Keyboard Racer Join Date: Feb 2008 Location: Mile High City Moto: Old Superbikes Posts: 1,016	On the roads I ride on, I can stall an upshift. And my bikes redline well below 10K. But I can't stall a downshift. It has to be immediate. All the blind corners require slow in and fast out. A tap on the gearshift puts me in a lower gear and into the meat of the powerband.