will def. do.

Sage advice, a good shop will give you a break on the price if you've done the basic prep work for them.

Also- don't be afraid to bargain a little. If they did a good job, quickly for a decent price-don't be a dick but if it's a little steep ask them what they can do for you if you get something from their gear or parts section. I saved 50 bucks on a tire change one time by buying a helmet and talking them into a discount on the work plus gear. Stressing that you're a loyal frequent customer helps.
Obviously you end up spending more money but if it's gear you need anyway...:idk:

Fork seals can be a bitch but they can be done yourself. For me I did my seals this last winter. They were PIA!

I made my own seal pounder....
http://i99.photobucket.com/albums/l3...alsnOil017.jpg
http://i99.photobucket.com/albums/l3...alsnOil020.jpg
http://i99.photobucket.com/albums/l3...alsnOil022.jpg
http://i99.photobucket.com/albums/l3...alsnOil018.jpg
http://i99.photobucket.com/albums/l3...alsnOil025.jpg
http://i99.photobucket.com/albums/l3...alsnOil026.jpg

Then it was a 4# BIG hammer and alot of winging and cussing!!

Would I suggest a novice to do this? NO! I say remove the forks from the bike and take the forks to a shop for the tear down, and rebuild. And have them do the bushings with the seals. Then use a nice Ohlins synthetic oil over standard dino oil. I loved it when I did it on my 9R.

6doublefive321,
i think that may have done it. will know for sure by the weekend.
:ty:


yeah, novice, that's me.
thanks G-man.





and again...............:twfix:

Nice Gasman. I've never done an upside-down fork before, but I have done damper-rod and cartridge forks. They are not that hard. As long as you do one at a time. Because you need the untampered one to find out how to put the other back together correctly.

The mechanic has to work under the clock. If a fork seal is leaking, it is usually because a rock has formed a burr on the fork. A mechanic does not have the time to use some emery cloth on the fork to smooth it out. But if you do it yourself, you do. A mechanic does not have the time to exactly measure the fluid level to the nearest m.m., but you do. A mechanic does not have the time to align the forks after assembly, but you do.

Plus, I get the self-satisfaction and pride of doing it myself, and crossing it off my list. And I like to make tools like Gasman. Such as the tool to hold the damper rod from turning when loosening the nut under the axle.

I hope it holds out. I've also found that new oil along with the cleaning works wonders. Fork oil loses its viscosity just like motor oil. In my opinion, fork oil is the most overlooked maintenance item on bikes.

I'm just saying to meet in the middle NW. Remove the forks yourself let them rebuild them. Just get a good mechanic. That may mean looking beyond the stealership to the smaller shops.